Tree Services: Safety Tips When Undertaking Tree Removal

When you are undertaking tree removal, one of the most important things you should consider is your safety. The cool thing is that there are plenty of safety tips you can put into consideration as given by tree services professionals:

Pay attention to the power lines

Are there trees near power lines that you intend to remove? You should pay close attention to them as they can easily start a fire. Before you start undertaking tree removal, you should contact the power company and let them know about your project.

The company will advise you on what you can do. The company can help you shield the lines or even de-energize them.

The US occupational safety and health administration requires that any tree within 10 feet of the power line be removed by an expert tree remover. The remover should also be accompanied by a second trained remover within a voice range to help with safe removal.

For you to make the process as safe as possible, you should work as a team. When cutting the tree, you should have someone on the ground providing guidance to the one doing the cutting.

If you have the skills, you can go ahead and remove the tree by yourself, but if you have never done it before, hire a professional to help you out.

Wear the right protective gear

You should ensure that you are fully protected from all harm at all times. You can this by wearing protective gear. Some of the must-haves include: hearing protection, gloves, hard hats, steel toe boots and plenty of others.

The ear protection devices that you wear are meant to protect your ears from the noisy cutting machines. For optimum protection, ensure that the pieces are of high quality. For them to last for a long time, you need to take good care of them. This calls for you to clean them regularly. You also should protect them from falls that can end up causing damage.

Always plan ahead

Tree cutting isn’t something that you wake up one day and decide to do. You need to plan for it as many things can go wrong. The obvious one is that if you cut the tree the wrong way, it can fall in the wrong direction, causing injuries.

For you to be on the safe side, you should think about the area where the tree will fall. As a rule of thumb, the area should be clear of houses, power lines, and any other distractions.

Is the tree you are looking to remove too large? You should think about how you are going to chop it into small pieces for an easy takedown.

The weather condition is an important factor to think about when bringing down the tree; therefore, you should ensure that you plan your tree removal on the day when it’s calm. You don’t want the tree to fall on your building, do you?

Be alert

Even if you have ensured that everything is in order, you shouldn’t be distracted on the work site. As mentioned above, anything can go wrong when you are removing the tree. For example, it might suddenly get windy and the tree suddenly changes direction.

At all times, you should be alert and be ready to react in the event of any danger. As a rule of thumb, you should never turn your back on the tree during the cutting.

One of the most effective ways of ensuring that you aren’t caught unaware is to have someone working with you. The assistant should look out for any dangers and let you know about them beforehand.

Use the right tools

This goes without saying. You need to use the right tree removal tools for you to have an easy time doing it. Ensure that the chain saw is properly oiled and sharp enough. So should be the case with any other machine you will be using in your work.

Tree cutting services Bethesda providers also recommend that you avoid using faulty tools as they tend to develop issues on the site. They also tend to make you waste a lot of time as they don’t work as fast as you would want them to.

About author

Related Articles

Leave a reply

Your email address will not be published. Required fields are marked *

Enter Captcha Here : *

Reload Image

Time limit is exhausted. Please reload CAPTCHA.


Close